ALPACKER BRAND H PACKERS

Our feature-rich ALPACKER brand H Packers are your go-to for all leveling, shimming, and spacing requirements, regardless of the substrate.

From as small as 1mm to as large as 15mm, and when accuracy is important, ALPACKER is your solution

  • Superior Polypropylene Construction
  • UV Stabilized
  • Easy Colour Identification
  • Accurate and Consistent Sizing
  • Deformation Resistant to 20T
  • Solvent Resistant
  • Mounting Holes
  • Beveled Leading Edges
  • Easy to Snap Break-off Point
  • NZ Made

 

Material 1mm – 1.5mm:
99% HIPS (High Impact Polystyrene)
Material 2mm – 15mm:
68% PP (Polypropylene) Homo-Polymer
20% PP (Polypropolene) Co-Polymer
Length: 87mm
Width: 38.5mm
Soft Point: 100°C – 105°C
Melt Point: 100°C – 105°C
Hardness: 100 Shore A

Alpacker Builders Bucket – 10L (326 Piece) – UV Stabilized

50 x 1mm Brown 50 x 1.5mm Red 36 x 2mm Yellow 34 x 3mm Blue 25 x 4mm Grey 25 x 5mm Orange 25 x 6mm Green 25 x 8mm Purple 25 x 10mm Black 15 x 15mm Natural 10 x 5 Deg White 1 x Builder Wedge
SKU: A10-LTR-326 Category:

$90.56

Alpacker Builders Bucket – 20L (652 Piece) – UV Stabilized

100 x 1mm Brown 100 x 1.5mm Red 75 x 2mm Yellow 75 x 3mm Blue 50 x 4mm Grey 50 x 5mm Orange 50 x 6mm Green 50 x 8mm Purple 50 x 10mm Black 30 x 15mm Natural 20 x 5 Deg White 2 x Builder Wedge

Reviews

There are no reviews yet.

Be the first to review “Alpacker Builders Bucket – 20L (652 Piece) – UV Stabilized”

Your email address will not be published. Required fields are marked *

SKU: A20-LTR-652 Category:

$156.98

Alpacker Builders Bucket Refills

In the interests of sustainability and recycling we are pleased to announce that your Builders Bucket can now be replenished instead of replacement. You can either order a full Builders Bucket or just the Packers you need. When you order a refill we will send you packaged Alpackers in a cardboard box that you can replenish your bucket with. Just let us know if its a re-order and we will do the rest.